iWA1 PRO_EN

横置きバイクスタンド iWA1 PRO_EN

￥ 25,190 （税込）

set

color

数量　：

売り切れ

カートに入れる

Exclusive Distributor
If you live in one of the following countries, please contact the agency.

KOERA
CHK International
http://www.chkcycle.co.kr/

MALAYSIA
Eddy Cycle Sdn. Bhd.
https://eddycycle.com/
Mail : info@eddycycle.com

Middle East
Albarriya Events Management
Mail : Tarek@albarriyaevents.com

SINGAPORE
cubeRpedia
https://cuberpedia.com/
Mail: cuberpedia@gmail.com

Have almost all the features of bike stand. For display stand when you do not ride on bike, and for maintenance stand after you ride bike.

* [Easy to use] : Can be used by simply placing the bike on top.
* [All the function you need] : Solid maintenance, daily inspection, and room display.
* [Any types]:Can be used with both quick release and through-axle types.
* Can be floated rear wheel while holding the bike securely.
* [No damage to the floor] : Rubberized floor contact area.
* [No damage to the bike] : PE coating bike contact area.
* [Workbench] : Reduces physical strain during long working hours.
* [Fork support] : The handle can be fixed for easier maintenance and cleaning around the fork.
* [Detachable] : Depends on working, "iWA1" display & maintenance bike stand and "iWA1-PD" work stand are detachable.
* [Compact storage] : Dedicated workbench can be folded for compact storage.
* [Included special parts tray] : Tools can be inserted and parts can be placed.

Acceptable bike models

iWA1

Road bike, Cross bike , MTB^*1, Mini velo, Cyclo-cross bike, Gravel bike
From 20 to 29 inch bike.
Under 40 mm tire width.
Over 51 mm BB width.^*2

"iWA1 Fork Support" attachment

Quick release, Thru-axle
Weight capacity : 10kg

*Fork end width other than 100 mm cannot be used.

*Be sure to use with the rear wheels attached.

"iWA1-PD" work bench

Weight capacity : Equivalent to the load capacity of iWA1, iWA1 Fork Support.

※1…Under 40 mm tire width.
※2…*Depending on the shape, some model may not be used.

[Easy to use]

Can be used by simply placing the bike on top.

[Fork support]

The handle can be fixed for easier maintenance and cleaning around the fork.

[No damage to the floor]

Rubberized floor contact area.

[No damage to the bike]

PE coating bike contact area.

[All the function you need]

Solid maintenance, daily inspection, and room display.

[Workbench]

Reduces physical strain during long working hours.

[Compact storage]

Dedicated workbench can be folded for compact storage.

[Included special parts tray]

Tools can be inserted and parts can be placed.

SPEC

"iWA1" maintenance & display stand

Size	approx.W310xD800xH480mm
Material	Body：steel Bike contract：PE coating Floor contract：rubber
Weight	2.4kg
Acceptable tire width	under 40 mm Acceptable BB width：over 51 mm *depending on the shape, some model may not be used.
Weight capacity	20kg

"iWA1 Fork Support" attachment

Size	approx.W140xD19xH100mm
Material	High Strength Resins
Weight	approx.180 g
Weight capacity	10 kg

*Fork end width other than 100 mm cannot be used.
*Be sure to use with the rear wheels attached.

"iWA1-PD" work bench

Size :	Folded▶ approx.W120xD120xH660mm Spread▶ approx.W490xD570xH520mm
Material	Steel / High Strength Resins
Weight	approx.3.7 kg

*Notice:Depending BB shape, the bike might be unsteady.(In this case, please use velcro for fix)
*Notice:Except 640 mm (±50 mm) from BB to front hub bike tire may touch floor.
*Notice:Depending on the shape, 640 mm (±50 mm) bike could might touch floor.
*Notice:If the rear wheel is removed while the fork support is in use, it may lose balance and fall forward.
*Notice:Through-axle and quick release is not included. Please use the one that comes with your bike.